Future Corporation Ltd - Empowering the Graphics Industry Search FCL Website
Future Corporation HomeFuture Corporation ProductsCustomer Service, Your Profile, Beta Testers and Lots More!Register your software NOW!Tehnical SupportDownloadsFCL Dealers, Distributors, Agents and Resellers
Site Map | Contact Us | Message Boards | Links | Back |
FutureRIP - Technical Support Pages Fonts and Text - Technical Support General Issues - Technical Support Import Export - Technical Support Output - Technical Support ContourCut/Cutters - Technical Support Open/Save - Technical Support Registration - Technical Support Spot_Colors/Tracing - Technical Support Drivers - Technical Support Welding/Curves - Technical Support

Registration


On-Line Help Why do I need to Register? 
On-Line Help I have installed FutureRIP SE but my printer won't print, I can't export or print out properly?
On-Line Help When I go to print out a cross prints over the image?
On-Line Help I no longer have my original computer that FutureRIP SE was registered on, what do I do now?
On-Line Help What happens if I have to reformat my computer/hard disk drive (HDD)?
On-Line Help I want to sell my copy of FutureRIP SE?
On-Line Help Can I install my copy onto multiple computers?
On-Line Help What is a Site License?
On-Line Help Do I have to purchase site licenses at the same time as the first copy?
On-Line Help Why doesn't FutureRIP SE need a dongle/block?
On-Line Help Can I buy a Dongle/Hardware Block protected version of FutureRIP SE?

Why do I need to Register? 
All Future Corporation software must be registered before it will become fully functional (unlocked). Be sure to have your unique Customer Number available which will be issued at time of purchase.
(16 digit number that commences with your country's telephone code i.e. US/Canada '01', UK '44', AUST '61' etc.) 

The registration procedure also requires a number that is generated from your computer after installing the software or from running the CD. This number is a unique 'Computer ID Number' that when combined with your Customer Number produces a unique Registration Number. This Registration Number is then typed into a window on your computer which registers (unlocks) the software.

To register any one of Future Corporation's software products:

1. Obtain a 'Customer Number' from Future Corporation (can only be done after the software is paid for).

2. Decide which computer to register the software on, and obtain that PC’s 'Computer ID Number'.

3. Using both the above numbers to obtain a 'Registration Number' by clicking on Register.

Once a Registration Number has been obtained, the software can be registered (unlocked). To do this, click on the Help Menu of the software and then click on 'Registration'. In the registration window that comes up you will be presented with your program status, along with your Computer ID Number and Transfer Code
(where applicable). To register click on the Register button and type in the Registration Number and then on OK.


I have installed FutureRIP SE but my printer won't print, I can't export or print out properly?
FutureRIP SE must be registered to become fully functional - see Registration.


When I go to print out a cross prints over the image?

You've probably become un-registered - see Re-Register.





I no longer have my original computer that FutureRIP SE was registered on, what do I do now?

You'll need to fill in some paperwork and explain what's happened and you may also need to provide some documents to verify any claim. We understand that things go wrong and often out of your control. However these can usually be easily explained and verified - see written forms, and also
'Duty of Disclosure'


What happens if I have to reformat my computer/hard disk drive (HDD)?

If you reformat your computer, your registration number will no longer be valid. You will need to be issued with a replacement number. If you are having a third party repair your computer, you should read the 'Duty of Disclosure' about registrations. Click here for Detailed Information.


I want to sell my copy of FutureRIP SE?
Under the 'End User License Agreement' (EULA) you may sell your copy and all interest in FutureRIP SE to a third party. However you must advise us in writing and sign a release form, otherwise the purchaser will have no rights to their purchase of FutureRIP SE from you - see written forms.


Can I install my copy onto multiple computers?
Yes. You can install FutureRIP SE onto as many computers as you wish. However only the computer that is registered will have access to cutting and unrestricted printing unless you purchase Site License/s for those other computers you wish to print and cut from.


What is a Site License?

A site license is the granting of an additional registration number for FutureRIP SE. Site licenses are usually half price, but do not come with an additional set of CD's or a Manuals and can only be used at the same premises as the full license or at the home of the registered owner.


Do I have to purchase site licenses at the same time as the first copy?
No. You can decide to purchase additional site licenses as the need arises.


Why doesn't FutureRIP SE need a dongle/block?
FutureRIP SE uses a digital registration method, removing the need for a dongle/block. Each customer receives a registration number for their computer that unlocks all of FutureRIP SE's features.


Can I buy a Dongle/Hardware Block protected version of FutureRIP SE?
No. These devices are expensive and generally unreliable. In the event of a Dongle failure you would need to purchase a replacement and then wait anything up to a week for it to arrive. whereas on-line registration can be done in less than a minute 24/7/365.


 
 © 1988-2003 Future Corporation Ltd - Copyright Notice Legal Information | Privacy Policy | Copyright Notice | Contact Us | FutureCorp.net